View TEA5757_104159.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
DATA SHEET
TEA5757; TEA5759 Self Tuned Radio (STR)
Product specification Supersedes data of 1996 Jan 09 File under Integrated Circuits, IC01 1999 Aug 26
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
FEATURES * The tuning system has an optimized IC partitioning both from application (omitting interferences) and flexibility (removable front panel option) point of view: the tuning synthesizer is on-chip with the radio * The tuning quality is superior and requires no IF-counter for stop-detection; it is insensitive to ceramic filter tolerances * In combination with the microcontroller, fast, low-power operation of preset mode, manual-search, auto-search and auto-store are possible * The local (internal) controller function facilitates reduced and simplified microcontroller software * The high integration level (radio and tuning synthesizer on one chip) means fewer external components with regard to the communication between the radio and the microcontroller (90% less components compared to the digital tuning application of a radio IC with external PLL tuning function) and a simple and small printed-circuit board * There will be no application considerations for the tuning system, with regards to quality and high integration level, since there will be no external 110 MHz buffers, loop filter or false lock elimination * The inherent FUZZY LOGIC behaviour of the Self Tuned Radio (STR), which mimics hand tuning, yields a potentially fast yet reliable tuning operation * The level of the incoming signal at which the radio must lock is software programmable * Two programmable ports ORDERING INFORMATION PACKAGE TYPE NUMBER NAME TEA5757H TEA5759H QFP44 DESCRIPTION
TEA5757; TEA5759
* High selectivity with distributed IF gain * Soft mute * Signal dependent stereo-blend * High impedance MOSFET input on AM * Wide supply voltage range of 2.5 to 12 V * Low current consumption 18 mA at AM and FM (including tuning synthesizer) * High input sensitivity * Low output distortion * Due to the new tuning concept, the tuning is independent of the channel spacing. GENERAL DESCRIPTION The TEA5757; TEA5759 is a 44-pin integrated AM/FM stereo radio circuit including a novel tuning concept. The radio part is based on the TEA5712. The TEA5757 is used in FM-standards in which the local oscillator frequency is above the radio frequency (e.g. European and American standards). The TEA5759 is the version in which the oscillator frequency is below the radio frequency (e.g. Japanese standard). The new tuning concept combines the advantages of hand tuning with electronic facilities and features. User `intelligence' is incorporated into the tuning algorithm and an improvement of the analog signal processing is used for the AFC function.
VERSION SOT307-2
plastic quad flat package; 44 leads (lead length 1.3 mm); body 10 x 10 x 1.75 mm
1999 Aug 26
2
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
QUICK REFERENCE DATA SYMBOL VCC1 VCC2 Vtune ICC1 IDD ICC2 Tamb V10 Vi1 THD PARAMETER supply voltage supply voltage for tuning tuning voltage supply current supply current supply current for tuning in preset mode (band-end to band-end) ambient temperature AM mode FM mode AM mode FM mode CONDITIONS MIN. 2.5 - 0.7 12 13 - - - -15 Vi1 = 5 mV (S+N)/N = 26 dB Vi1 = 1 mV Vi5 = 1 mV 36 40 - 40
TEA5757; TEA5759
TYP. - - - 15 16 3.3 2.7 - - 45 55 0.8 12 12
MAX.
UNIT V V V mA mA mA mA A C mV V %
VCC2 - 0.75 18 19 - - 800 +60
AM performance; note 1 AF output voltage RF sensitivity input voltage total harmonic distortion 70 70 2.0
FM performance; note 2 V10 Vi5 THD AF output voltage RF limiting sensitivity total harmonic distortion 48 1.2 0.3 57 3.8 0.8 mV V % V10 at -3 dB; 0.4 V10 is 0 dB at Vi5 = 1 mV IF filter SFE10.7MS3A20K-A -
MPX performance; note 3 cs Notes 1. VCC1 = 3 V; VCC2 = 12 V; VDDD = 3 V; fi = 1 MHz; m = 0.3; fm = 1 kHz; measured in Fig.9 with S1 in position A and S2 in position B; Vn refers to pin voltages; Vi(n) refers to test circuit (see Fig.9). 2. VCC1 = 3 V; VCC2 = 12 V; VDDD = 3 V; fi = 100 MHz; fm = 22.5 kHz; fm = 1 kHz; measured in Fig.9 with S2, S3 and S5 in position A; Vn refers to pin voltages; Vi(n) refers to test circuit (see Fig.9). 3. VCC1 = 3 V; VCC2 = 12 V; VDDD = 3 V; Vi3(L + R) = 155 mV; Vpilot = 15.5 mV; fi = 1 kHz; measured in Fig.9 with S2 and S3 in position B. channel separation 26 30 - dB
1999 Aug 26
3
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... 1999 Aug 26
FM-RFO FMOSC FM-IFI1 FM-MIXER FM-IFI2 FM-IFO1 IFGND FMDEM FSI 3 FM-RFI RFGND DATA BUS-CLOCK WRITE-ENABLE VSTAB(A) VSTAB(B) VCC1 VDDD RIPPLE 43 42 28 27 29 38 34 7 23 1 STATUS REGISTER STABILIZER SHIFT REGISTER DECODER up down level IN-LOCK DETECTOR stereo 14 MATRIX 15 AFRO stereo MULTIPLEXER PROGRAMMABLE COUNTER FM hard mute XTAL DGND P1 P0 25 26 31 30 CRYSTAL OSCILLATOR WINDOW DETECTOR AM AFC level SEQUENTIAL CIRCUIT CHARGE PUMP SDS MUTE mono 13 MUTE AFLO AM/FM INDICATOR FM FRONT-END FM OSCILLATOR FM MIXER FM IF1 FM IF2 FM DETECTOR PILOT DETECTOR 19 kHz 12 PLL 38 kHz 9 LFI VCO 5 39 37 35 33 17 18 21 16 24 PILFIL MO/ST PRESCALER LAST-STATION MEMORY
handbook, full pagewidth
BLOCK DIAGRAM
Philips Semiconductors
Self Tuned Radio (STR)
4
AM-RFI 2 AM FRONT-END AM OSCILLATOR AM MIXER AM IF AGC AM DETECTOR 6 40 41 36 44 8 22 10 AMOSC AM-IFI/O2 AM-MIXER AM-IFI1 AGC TUNE AFO VCC2
TEA5757; TEA5759
19 20 32 V/I CONVERTER AFC(n) AFC(p) AFC
TEA5757; TEA5759
11
4
MHA111
Product specification
MPXI
RFGND
Fig.1 Block diagram.
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
PINNING SYMBOL RIPPLE AM-RFI FM-RFO RFGND FMOSC AMOSC VCC1 TUNE VCO AFO MPXI LFI MUTE AFLO AFRO PILFIL IFGND FMDEM AFC(n) AFC(p) FSI VCC2 VDDD MO/ST XTAL DGND BUS-CLOCK DATA WRITE-ENABLE P0 P1 AFC FM-IFI2 VSTAB(B) FM-IFO1 AM-IFI/O2 FM-IFI1 VSTAB(A) FM-MIXER AM-MIXER 1999 Aug 26 PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 ripple capacitor input AMRF input parallel tuned FMRF circuit to ground RF ground and substrate
TEA5757; TEA5759
DESCRIPTION
parallel tuned FM-oscillator circuit to ground parallel tuned AM-oscillator circuit to ground supply voltage tuning current output voltage controlled oscillator input AM/FM AF output (output impedance typical 5 k) stereo decoder input (input impedance typical 150 k) loop-filter input mute input left channel output (output impedance typical 4.3 k) right channel output (output impedance typical 4.3 k) pilot detector filter input ground of IF, detector and MPX stage ceramic discriminator input AFC negative output AFC positive output field-strength indicator supply voltage for tuning digital supply voltage mono/stereo and tuning indication output crystal input digital ground bus-clock input bus data input/output bus write-enable input programmable output port (P0) programmable output port (P1) 450 kHz LC-circuit FMIF input 2 (input impedance typical 330 ) internal stabilized supply voltage (B) FMIF output 1 (output impedance typical 330 ) input/output to IF-Tank (IFT); output: current source FMIF input 1 (input impedance typical 330 ) internal stabilized supply voltage (A) ceramic filter output (output impedance typical 330 ) open-collector output to IFT 5
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
SYMBOL AM-IFI1 RFGND FM-RFI AGC
PIN 41 42 43 44 FMRF ground
DESCRIPTION IFT or ceramic filter input (input impedance typical 3 k) FMRF aerial input (input impedance typical 40 ) AGC capacitor input
40 AM-MIXER
39 FM-MIXER
handbook, full pagewidth
36 AM-IFI/O2
38 VSTAB(A)
RIPPLE AM-RFI FM-RFO RFGND FMOSC AMOSC VCC1 TUNE VCO
1 2 3 4 5 6 7 8 9
34 VSTAB(B) 33 FM-IFI2 32 AFC 31 P1 30 P0 29 WRITE-ENABLE 28 DATA 27 BUS-CLOCK 26 DGND 25 XTAL 24 MO/ST 23 VDDD VCC2 22
MHA112
TEA5757H TEA5759H
AFO 10 MPXI 11 LFI 12 MUTE 13 AFLO 14 AFRO 15 PILFIL 16 IFGND 17 FMDEM 18 AFC(n) 19 AFC(p) 20 FSI 21
Fig.2 Pin configuration.
1999 Aug 26
6
35 FM-IFO1
41 AM-IFI1
42 RFGND
37 FM-IFI1
43 FM-RFI
44 AGC
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
FUNCTIONAL DESCRIPTION The TEA5757; TEA5759 is an integrated AM/FM stereo radio circuit including digital tuning and control functions. The radio The AM circuit incorporates a double balanced mixer, a one-pin low-voltage oscillator (up to 30 MHz) and is designed for distributed selectivity. The AM input is designed to be connected to the top of a tuned circuit. AGC controls the IF amplification and for large signals it lowers the input impedance of the AM front-end. The first AM selectivity can be an IF-Tank (IFT) as well as an IFT combined with a ceramic filter; the second one is an IFT. The FM circuit incorporates a tuned RF stage, a double balanced mixer, a one-pin oscillator and is designed for distributed IF ceramic filters. The FM quadrature detector uses a ceramic resonator (or LC). The PLL stereo decoder incorporates a signal dependent stereo-blend circuit and a soft-mute circuit. Tuning The tuning concept of the Self Tuned Radio (STR) is based on FUZZY LOGIC: it mimics hand tuning (hand tuning is a combination of coarse and fine tuning to the qualitatively best frequency position). As a consequence the tuning system is very fast. The tuning algorithm, which is controlled by the sequential circuit (see Fig.1), is completely integrated; so there are only a few external components needed. The bus and the microcontroller can be kept very simple. The bus only consists of three wires (BUS-CLOCK, DATA and WRITE-ENABLE). The microcontroller must basically give two instructions: * Preset operation * Search operation. PRESET OPERATION In preset mode, the microcontroller has to load information such as frequency band, frequency and mono/stereo. This information has to be sent via the bus to the STR. The internal algorithm controls the tuning sequence as follows: 1. The information is loaded into the shift register, the last-station memory and the counter.
TEA5757; TEA5759
2. The Automatic Frequency Control (AFC) is switched off. 3. The counter starts counting the frequency and the tuning voltage is varied until the desired frequency roughly equals the real frequency. 4. The AFC is then switched on and the counter is switched off. 5. The real frequency is more precisely tuned to the desired frequency. After the AFC has tuned the real frequency to the desired frequency an in-lock signal can be generated. In order to get a reliable in-lock signal, there are two parameters measured: the field strength and the S-curve. The field strength indicates the strength of the station and by looking at the S-curve the system can distinguish false in-locks from real in-locks (false in-locks occur on the wrong slope of the S-curve). In the event of fading or pulling the in-lock signal becomes logic 0 and the synthesizer will be switched on again and the algorithm will be repeated. SEARCH OPERATION During a search operation, the only action the microcontroller has to take is: sending the desired band plus the direction and the search sensitivity level to the STR. The search operation is performed by the charge pump until an in-lock signal is generated (combination of measuring the field strength and the S-curve). The AFC then fine tunes to the station. The frequency belonging to the found station will be counted by the counter and written into the last-station memory and the shift register of the counter. At this time the frequency is available in the shift register and can be read by the microcontroller. The microcontroller decides whether the frequency is within the desired frequency band. If so, this frequency can be stored under a preset and if not, a new search action should be started. To ensure that the search function operates correctly under all conditions the following search sequence must be applied: * Store the current frequency in the memory * Issue the search command * Wait for data valid and read the new frequency * If the new frequency is the same as the stored frequency, issue a pre-set step (e.g. 50 kHz) and start the search sequence again.
1999 Aug 26
7
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
Description of the bus The TEA5757; TEA5759 radio has a bus which consists of three wires, as shown in Table 1. Table 1 Bus signals DESCRIPTION software driven clock input data input/output PIN 27 28 29 Table 2
TEA5757; TEA5759
Bus-clock functions MO/ST (PIN 24) LOW HIGH LOW HIGH RESULT stereo mono tuned not tuned
BUS-CLOCK LOW LOW HIGH HIGH
SIGNAL BUS-CLOCK DATA
WRITE-ENABLE write/read input
The TEA5757; TEA5759 has a 25-bit shift register; see Table 3 for an explanation of the shift register bits. If in search mode no transmitter can be found, all frequency bits of the shift register are set to logic 0. The bus protocol is depicted in Figs 3 and 4.
These three signals, together with the mono/stereo pin (MO/ST; pin 24), communicate with the microcontroller. The mono/stereo indicator has two functions, which are controlled by the BUS-CLOCK, as shown in Table 2. Table 3 Explanation of the shift register bits BIT S.24 (MSB) D.23 M.22 B0.21 B1.20 P0.19 P1.18 S0.17 S1.16 15 F.14 to F.0 (LSB) Note dummy frequency search-level of station port note 1 DESCRIPTION search start/end search up/down mono/stereo band 0 1 0 1 0 1 LOGIC STATE
RESULT after a search when a station is found or after a preset during the search action indicates if the radio has to search down indicates if the radio has to search up stereo is allowed mono is required (radio switched to forced mono)
see Table 4 selects FM/MW/LW/SW band user programmable bits which e.g. can be used as band switch driver
see Table 5 determines the locking field strength during an automatic search, automatic store or manual search - - buffer determine the tuning frequency of the radio; see Table 6 for the bit values
1. The output pins 30 and 31 can drive currents up to 5 mA; bits P0.19 and P1.18 control the output voltage of the control pins P0 (pin 30) and P1 (pin 31): a) Bit P0.19 LOW sets P0 (pin 30) to LOW. b) Bit P0.19 HIGH sets P0 (pin 30) to HIGH. c) Bit P1.18 LOW sets P1 (pin 31) to LOW. d) Bit P1.18 HIGH sets P1 (pin 31) to HIGH.
1999 Aug 26
8
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
Table 4 Truth table for bits B0.21 and B1.20 B1.20 0 1 0 1 BAND SELECT FM MW LW SW F.14 F.13 F.12 Table 5 Truth table for bits S1.16 and S0.17 SIGNAL RECEPTION S1.16 0 0 1 1 S0.17 0 1 0 1 FM (V) >5 >10 >30 >150 AM (V) >28 >40 >63 >1000 F.11 F.10 F.9 F.8 F.7 F.6 F.5 F.4 F.3 F.2 F.1 F.0 Notes BIT Table 6
TEA5757; TEA5759
Values for bits F.14 to F.0 BIT VALUE 214 213 212 211 210 29 28 27 26 25 24 23 22 21 20 FM VALUE(1) (kHz) - 102400 51200 25600 12800 6400 3200 1600 800 400 200 100 50 25 12.5 AM VALUE(2) (kHz) 16384 8192 4096 2048 1024 512 256 128 64 32 16 8 4 2 1
B0.21 0 0 1 1
1. FM value of the affected oscillators: a) FM VALUE = FMRF + FMIF (for TEA5757). b) FM VALUE = FMRF - FMIF (for TEA5759). 2. AM value of the affected oscillators: AM VALUE = AMRF + AMIF.
1999 Aug 26
9
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
READING DATA While WRITE-ENABLE is LOW data can be read by the microcontroller. At a rising edge of the BUS-CLOCK, data is shifted out of the register. This data is available from the point where the BUS-CLOCK is HIGH until the next rising edge of the BUS-CLOCK occurs (see Fig.3). To read the entire shift register 24 clock pulses are necessary. WRITING DATA
TEA5757; TEA5759
While WRITE-ENABLE is HIGH the microcontroller can transmit data to the TEA5757; TEA5759 (hard mute is active). At a rising edge of the BUS-CLOCK, the register shifts and accepts one bit into LSB. At clock LOW the microcontroller writes data (see Fig.4). To write the entire shift register 25 clock pulses are necessary.
handbook, full pagewidth
WRITE-ENABLE
data read
BUS-CLOCK
DATA data available data available after search ready MSB is LOW data shift
MBE817
Fig.3 Read data.
handbook, full pagewidth
WRITE-ENABLE
BUS-CLOCK
DATA
MBE818
data shift
data change
Fig.4 Write data.
1999 Aug 26
10
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
BUS TIMING
TEA5757; TEA5759
handbook, full pagewidth
WRITE-ENABLE
VIH BUS-CLOCK VIL t HIGH t LOW
DATA
MBE819
t da
Fig.5 Bus timing.
Table 7
Digital inputs PARAMETER MIN. - 0.6 MAX. UNIT
SYMBOL Digital inputs VIH VIL Timing fclk tHIGH tLOW tda
HIGH-level input voltage LOW-level input voltage
1.4 - - 1.67 1.67 -
V V
clock input frequency clock HIGH time clock LOW time shift register available after `search ready'
300 - - 14
kHz s s s
1999 Aug 26
11
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VCC1 Ptot Tstg Tamb Tj Ves Note supply voltage total power dissipation storage temperature ambient temperature junction temperature electrostatic handling voltage for all pins note 1 Tamb = 70 C PARAMETER CONDITIONS
TEA5757; TEA5759
MIN. 0 - -65 -15 -15 -
MAX. 13.2 250 +150 +60 +150 200 V
UNIT mW C C C V
1. Charge device model; equivalent to discharging a 200 pF capacitor via a 0 series resistor. THERMAL CHARACTERISTICS SYMBOL Rth(j-a) PARAMETER thermal resistance from junction to ambient CONDITIONS in free air VALUE 65 UNIT K/W
1999 Aug 26
12
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
CHARACTERISTICS VCC1 = 3 V; Tamb = 25 C; unless otherwise specified. SYMBOL VCC1 VCC2 VDDD Vtune ICC2 PARAMETER supply voltage supply voltage for tuning supply voltage for digital part tuning voltage supply current for tuning in preset mode (band-end to band-end) CONDITIONS 2.5 - 2.5 0.7 - MIN. - - - - -
TEA5757; TEA5759
TYP. 12 12 12
MAX. V V V A
UNIT
VCC2 - 0.75 V 800
fBUS-CLOCK(max) maximum BUS-CLOCK frequency ICC1 IDD ICC1 IDD tsearch tacq current consumption during acquisition of VCC1 current consumption during acquisition of IDD current consumption after acquisition of VCC1 current consumption after acquisition of IDD AM mode FM mode AM mode FM mode AM mode FM mode AM mode FM mode
- 12 12.5 - - 12 13 - - - - - - - 0.144 50 - - V30 = 3 V V31 = 3 V V30 = 0 V V31 = 0 V 4 4 5 5
- 15 15.5 4.8 5.5 15 16 3.3 2.7 - 100 100 200 500 - - - - 6 6 9 9
300 18 18.5 - - 18 19 - - 10 - - - - 30 150 1 100 - - - -
kHz mA mA mA mA mA mA mA mA s ms ms ms ms MHz MHz kHz Hz mA mA mA mA
synthesizer auto-search time for FM mode empty band synthesizer preset acquisition time between two band limits FM MW LW SW
fband fFM fAM IP0(sink) IP1(sink) IP0(source) IP1(source)
frequency band range of the synthesizer AFC inaccuracy of FM AFC inaccuracy of AM sink current of software programmable output P0 sink current of software programmable output P1 source current of software programmable output P0 source current of software programmable output P1
AM mode FM mode
1999 Aug 26
13
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
AM CHARACTERISTICS Input frequency fi = 1 MHz; m = 0.3; fm = 1 kHz; measured in test circuit at pin 10 (see Fig.9); S2 in position B; Vi1 measured at input of matching network at pin 2; matching network adjusted to maximum output voltage at low input level; Vn refers to pin voltages; Vi(n) refers to test circuit (see Fig.9); unless otherwise specified. SYMBOL V10 Vi1 Vi1 PSRR PARAMETER AF output voltage RF sensitivity input voltage V 10 power supply ripple rejection ---------- V 7 input current (pin 2) input capacitance (pin 2) front-end conversion gain signal plus noise-to-noise ratio total harmonic distortion IF suppression Vi1 = 1 mV V10 = 30 mV CONDITIONS Vi1 = 5 mV (S+N)/N = 26 dB V7 = 100 mV (RMS); 100 Hz; V7 = 3.0 V V44 = 0.2 V V44 = 0.2 V V44 = 0.2 V V44 = 0.9 V (S+N)/N THD 450 MIN. 36 40 150 - - - 5 -26 - - - TYP. 45 55 300 -47 MAX. 70 70 - - - 4 14 0 - 2.0 - UNIT mV V mV dB
large signal voltage handling capacity m = 0.8; THD 8%
Ii Ci Gc
0 - 10 -14 50 0.8 56
A pF dB dB dB % dB
FM CHARACTERISTICS Input frequency fi = 100 MHz; f = 22.5 kHz; fm = 1 kHz; measured in test circuit (see Fig.9) at pin 10; S2 in position B; Vn refers to pin voltages; Vi(n) refers to test circuit (see Fig.9); unless otherwise specified. SYMBOL V10 Vi5 Vi5 Vi5 PSRR PARAMETER AF output voltage RF sensitivity input voltage RF limiting sensitivity CONDITIONS Vi5 = 1 mV (S+N)/N = 26 dB V10 at -3 dB; V10 is 0 dB at Vi5 = 1 mV V7 = 100 mV (RMS); 100 Hz; V7 = 3.0 V MIN. 40 1 0.4 - -44 TYP. 48 2 1.2 500 - MAX. 57 3.8 3.8 - - UNIT mV V V mV dB
large signal voltage handling capacity THD < 5% V 10 power supply ripple rejection ---------- V 7 V 37 front-end conversion gain -------- V i5 signal plus noise-to-noise ratio total harmonic distortion Vi5 = 1 mV IF filter SFE10.7MS3A20K-A
Gc
12
18
22
dB
(S+N)/N THD
- -
62 0.3
- 0.8
dB %
1999 Aug 26
14
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
STEREO DECODER CHARACTERISTICS Vi3(L + R) = 155 mV; Vpilot = 15.5 mV; f = 1 kHz; apply unmodulated RF signal of 100 mV to front-end to set radio to maximum channel separation; soft mute off (S4 in position A); unless otherwise specified. SYMBOL V14/15 Vpilot(s) Vpilot(m) VAF-L/Vi3 (S+N)/N THD cs 19 38 mute(s) stereo-blend soft mute depth PARAMETER AF output voltage switch to stereo switch to mono MPX voltage gain signal plus noise-to-noise ratio total harmonic distortion channel separation carrier and harmonic suppression 19 kHz (200 mV) = 0 dB 38 kHz Vi5 = 200 V Vi5 = 20 V Vi5 = 3 V; V14 = V15 Vi5 = 1 V; V14 = V15 TUNING CHARACTERISTICS SYMBOL VFM PARAMETER FM voltage levels high (auto-store/search) medium (auto-store/search) low (auto-store/search) nominal (preset mode/tuning indication) VAM AM voltage levels high (auto-store/search) medium (auto-store/search) low (auto-store/search) nominal (preset mode/tuning indication) VAFC(off) AFC voltage off mode CONDITIONS -3 dB-point at Vi5 = 2 V S0 = 1; S1 = 1 S0 = 0; S1 = 1 S0 = 1; S1 = 0 S0 = 0; S1 = 0 -3 dB-point at Vi5 = 2 V S0 = 1; S1 = 1 S0 = 0; S1 = 1 S0 = 1; S1 = 0 S0 = 0; S1 = 0 -3 dB-point at Vi5 = 2 V FM mode AM mode mute(h) hard mute depth - - 3 25 60 - - - V V dB 400 50 32 25 1000 63 40 28 2500 80 50 40 V V V V 60 10 4 3 150 30 10 5 500 55 20 9 V V V V MIN. TYP. MAX. UNIT Vpilot = 15.5 mV (stereo) CONDITIONS MIN. - - 2 -1.5 - - 26 27 16 22 - -1 - TYP. 160 8 5 - 74 0.5 30 32 21 30 1 0 -6 MAX. - 12 - +1.5 - 1.0 - - - - 2 - -10 UNIT mV mV mV dB dB % dB dB dB dB dB dB dB
WRITE-ENABLE = HIGH -
1999 Aug 26
15
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... 1999 Aug 26
handbook, full pagewidth
Philips Semiconductors
Self Tuned Radio (STR)
-20 10 0
0
20
40
60
80
100
(dBV)
(dB)
(1)
120 9 THD (%) 8 7 6 5 4 3
-10 -20 -30 -40
(2)
16
-50 -60 -70 -80 10-7
(3)
2 1 0 Vi1 (V) 1
MBE853
10-6
10-5
10-4
10-3
10-2
10-1
TEA5757; TEA5759
Product specification
(1) Audio signal. (2) Noise. (3) Harmonic distortion.
Fig.6 AM mode.
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... 1999 Aug 26
handbook, full pagewidth
Philips Semiconductors
Self Tuned Radio (STR)
-20 10 0
0
20
40
60
80
100
(dBV)
(dB)
(1) (3)
120 9 THD (%) 8 7 6
-10 -20 -30 -40
(4)
5 4
(5)
17
(1) (2) (3) (4) (5) (6)
-50 -60 -70 -80 10-7
3
(2) (6)
2 1 0 Vi5 (V) 1
MHA115
10-6
10-5
10-4
10-3
10-2
10-1
TEA5757; TEA5759
Mono signal. Noise in mono mode. Left channel with modulation left. Right channel with modulation left. Noise in stereo mode. Harmonic distortion (measured with f = 75 kHz).
Product specification
Fig.7 FM mode.
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
INTERNAL CIRCUITRY Table 8 PIN NO. 1 Equivalent pin circuits and pin voltages PIN SYMBOL RIPPLE 2.1 DC VOLTAGE (V) AM 2.1 FM
7
TEA5757; TEA5759
EQUIVALENT CIRCUIT
1 k 1
3 k
70 pF
17
MBE821
2
AM-RFI
0
0
4
2
MBE822
3
FM-RFO
0
0
220 43 42 3
MHA105
4 5
RFGND FMOSC
0 0
0 0
5
4
MBE823
1999 Aug 26
18
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
PIN NO. 6
PIN SYMBOL AMOSC 0
DC VOLTAGE (V) AM 0 FM
EQUIVALENT CIRCUIT
6
4
MBE824
7 8
VCC1 TUNE
3.0 -
3.0 -
22
8
26
MBE825
9
VCO
1.3
0.95
1 k
9 10 k 17
MBE826
10
AFO
0.6
0.7
10
5 k 17
MBE827
1999 Aug 26
19
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
PIN NO. 11
PIN SYMBOL MPXI
DC VOLTAGE (V) AM 1.23 FM 1.23
EQUIVALENT CIRCUIT
150 k 11 9.5 k
150 k
17
MBE828
12
LFI
0.1
0.8
4 k
12
13 k
17
MBE829
13
MUTE
0.7
0.7
7 k 13
50 k
17
MBE830
14
AFLO
0.65
0.65
14 5 k
17
MBE831
1999 Aug 26
20
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
PIN NO. 15
PIN SYMBOL AFRO
DC VOLTAGE (V) AM 0.65 FM 0.65
EQUIVALENT CIRCUIT
15 5 k
17
MBE832
16
PILFIL
0.95
0.95
16 10 k 10 k
17
MBE833
17 18
IFGND FMDEM
0 -
0 1.0
180 18 910
17
MBE834
19
AFC(n)
-
-
10 k
10 k 19
MHA106
1999 Aug 26
21
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
PIN NO. 20
PIN SYMBOL AFC(p) -
DC VOLTAGE (V) AM - FM
EQUIVALENT CIRCUIT
10 k
10 k 20
MHA107
21
FSI
-
-
1.4 V 40 k
21 12 to 34 k (dependent on bits 16 and 17) 26
MBE836
22 23 24
VCC2 VDDD MO/ST
- 3.0 -
- 3.0 -
24
100
26
MBE837
25
XTAL
-
-
50 k 50 k 50 k
25
26
MBE838
26
DGND
0
0
1999 Aug 26
22
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
PIN NO. 27
PIN SYMBOL BUS-CLOCK -
DC VOLTAGE (V) AM - FM
EQUIVALENT CIRCUIT
27
26
MBE839
28 29
DATA WRITE-ENABLE
- -
- -
28
100 100 k 50 k 29 26
MBE840
30
P0
-
-
23 120 100 k
30 20 k
26
MHA108
31
P1
-
-
23 120 100 k
31 20 k
26
MHA109
1999 Aug 26
23
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
PIN NO. 32
PIN SYMBOL AFC -
DC VOLTAGE (V) AM - FM
EQUIVALENT CIRCUIT
34 20 k 32
MBE842
33
FM-IFI2
-
0.73
34 140 33 2.2 k 6 pF
17
MBE843
34
VSTAB(B)
1.4
1.4
7 1 k 1 34
MBE844
35
FM-IFO1
-
0.69
34
35
560
MBE845
36
AM-IFI/O2
1.4
1.4
34
36
3.6 k
3.6 k
17
MBE846
1999 Aug 26
24
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
PIN NO. 37
PIN SYMBOL FM-IFI1 -
DC VOLTAGE (V) AM FM 0.73
38
EQUIVALENT CIRCUIT
140 37 1.9 k 6 pF
17
MBE847
38
VSTAB(A)
1.4
1.4
7 1 k 1 38
MBE848
39
FM-MIXER
-
1.0
39 680
30 pF
MHA110
40
AM-MIXER
1.4
1.4
40 38
MBE850
41
AM-IFI1
1.4
1.4
38 3 k 41 7.5 k 7.5 k
17
MBE851
1999 Aug 26
25
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
PIN NO. 42 43
PIN SYMBOL RFGND FM-RFI 0 -
DC VOLTAGE (V) AM 0 0.73 FM
EQUIVALENT CIRCUIT
220 43 42 3
MHA105
44
AGC
0.1
0.7
1 k 1 k 44
1 k
17
MBE852
1999 Aug 26
26
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... 1999 Aug 26 27
75 kHz GND P1 P0 47 k TUNE 22 nF L1 (8) 18 pF BB112 (14)
TEST AND APPLICATION INFORMATION
Philips Semiconductors
BB804
BB804
Self Tuned Radio (STR)
18 k TUNE
10 pF
18 k L8 (1) TUNE
10 pF
L7 (2)
VSTAB(A) K1
(3)
VSTAB(B) K3 K2
(4) (5)
100 nF VCC1
3 4.7 nF 43
5
39
37
35
33
17
18
21 16
2.2 F
10 k L6 (6) 22 pF 42 28 27 29 38 34 7 100 nF 10 23 220 nF 1 100 F 25
(13)
24 470 nF 2.2 k 470 nF 50 k 68 k
MO/ST
DATA BUS-CLOCK WRITE-ENABLE VSTAB(A) VSTAB(B) VCC1
12 9
TEA5757; TEA5759
12 nF 14
(12)
100 nF left output right output
15 12 nF 13 26 31 30 2 6 L2 (9) 18 pF L3
(10) (11)
100 nF
(12)
19 20 32
470 nF
4.7 F
VSTAB(B) L5 (7)
40
41
36 10 F
44 10 nF
8
22
10 220 nF
11
4
TEA5757; TEA5759
330 pF L4 470 nF
MHA113
(1) L8 = MC117 E523FN-2000242, 38 pF 3%, 18 pF BB112 (14) TOKO. VSTAB(A) VSTAB(B) (2) L7 = MC117 E523FN-2000242, 38 pF 3%, 470 pF 47 k TOKO. (3) K1 = SFE10.7MS3, MURATA. TUNE (4) K2 = SFE10.7MS3, MURATA. (5) K3 = CDA10.7-MG40-A, MURATA. (6) L6 = 60 nH. (7) L5 = 7P A7MCS-11845Y, C = 180 pF, Q = 90, TOKO. (8) L1 = 250 H ferroceptor. Fig.8 Application diagram. (9) L2 = 7P 7DRS-11459N, 110 H at 796 kHz, Q = 80, TOKO.
handbook, full pagewidth
TUNE
VCC2
Product specification
(10) L3 = 7P A7MCS-11844N, C = 180 pF, Q = 90, TOKO. (11) L4 = 7P A7MCS-11845Y, C = 180 pF, Q = 90, TOKO. (12) De-emphasis time constant is 50 s: Cde-emp = 12 nF. De-emphasis time constant is 75 s: Cde-emp = 18 nF. (13) Standard applications: 30 ppm at 25 C. Short wave applications: 20 ppm at 25 C. (14) Alternatively BB512, Siemens or KV1561A, TOKO.
This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in _white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ... 1999 Aug 26 28
75 kHz GND P1 P0
50 1 MHz Vi1 43 6.8 L1(6)
(12)
Philips Semiconductors
50 Vi4
330 50
Self Tuned Radio (STR)
BB804
BB804
10.7 MHz 1 nF
18 k TUNE
10 pF
18 k L8 (1) TUNE
10 pF
B L7 (2) VSTAB(A) A K1
(3)
S5
VSTAB(B) K3 K2
(4) (5)
VCC1
100 nF
10 k
3
50 Vi5 100 MHz 27 560
5
39
37
35
33
17
18
21 16 24
1 nF
91
2.2 F MO/ST 470 nF
43
42 28 27 29 38 34 7 100 nF 10 23 220 nF 1 100 F 25
12 9
2.2 k 470 nF 68 k
(11)
DATA BUS-CLOCK WRITE-ENABLE VSTAB(A) VSTAB(B) VCC1
50 k left output right output
14 15
12 nF
100 nF
TEA5757; TEA5759
13
(11)
12 nF
100 nF 4.7 F S4 A 8.2 k
B
26 31 30 2
680 pF
19 20 32 6
(8)
470 nF VSTAB(B) L5 (7)
40
S1 A B
41
36 10 F
44 10 nF
8
22
10
B S2 A A S3
11
4
L2 18 pF
(1) L8 = MC117 E523FN-2000242, 38 pF 3%, 18 pF (13) TOKO. BB112 (2) L7 = MC117 E523FN-2000242, 38 pF 3%, 470 pF TOKO. 47 k (3) K1 = SFE10.7MS3, MURATA. (4) K2 = SFE10.7MS3, MURATA. TUNE (5) K3 = CDA10.7-MG40-A, MURATA. (6) L1 = 22281-30091. (7) L5 = 7P A7MCS-11845Y, C = 180 pF, Q = 90, TOKO. (8) L2 = 7P 7DRS-11459N, 110 H at 796 kHz, Q = 80, TOKO. (9) L3 = 7P A7MCS-11844N, C = 180 pF, Q = 90, TOKO. (10) L4 = 7P A7MCS-11845Y, C = 180 pF, Q = 90, TOKO.
L3
(9)
3 k
330 pF 220 nF Vi3 50
TEA5757; TEA5759
470 nF 220 nF L4
(10)
B
handbook, full pagewidth
VSTAB(A) Vi2 50
VSTAB(B)
TUNE VCC2
5 k 50 MPX
450 kHz
Product specification
MHA114
Fig.9 Test circuit.
(11) De-emphasis time constant is 50 s: Cde-emp = 12 nF. De-emphasis time constant is 75 s: Cde-emp = 18 nF. (12) Standard applications: 30 ppm at 25 C. Short wave applications: 20 ppm at 25 C. (13) Alternatively BB512, Siemens or KV1561A, TOKO.
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
PACKAGE OUTLINE
TEA5757; TEA5759
QFP44: plastic quad flat package; 44 leads (lead length 1.3 mm); body 10 x 10 x 1.75 mm
SOT307-2
c
y X
A 33 34 23 22 ZE
e E HE wM bp pin 1 index 44 1 bp D HD wM 11 ZD B vM B vMA 12 detail X A A2 (A 3) Lp L
A1
e
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 2.10 A1 0.25 0.05 A2 1.85 1.65 A3 0.25 bp 0.40 0.20 c 0.25 0.14 D (1) 10.1 9.9 E (1) 10.1 9.9 e 0.8 HD 12.9 12.3 HE 12.9 12.3 L 1.3 Lp 0.95 0.55 v 0.15 w 0.15 y 0.1 Z D (1) Z E (1) 1.2 0.8 1.2 0.8 10 0o
o
Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT307-2 REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION
ISSUE DATE 95-02-04 97-08-01
1999 Aug 26
29
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
SOLDERING Introduction to soldering surface mount packages This text gives a very brief insight to a complex technology. A more in-depth account of soldering ICs can be found in our "Data Handbook IC26; Integrated Circuit Packages" (document order number 9398 652 90011). There is no soldering method that is ideal for all surface mount IC packages. Wave soldering is not always suitable for surface mount ICs, or for printed-circuit boards with high population densities. In these situations reflow soldering is often used. Reflow soldering Reflow soldering requires solder paste (a suspension of fine solder particles, flux and binding agent) to be applied to the printed-circuit board by screen printing, stencilling or pressure-syringe dispensing before package placement. Several methods exist for reflowing; for example, infrared/convection heating in a conveyor type oven. Throughput times (preheating, soldering and cooling) vary between 100 and 200 seconds depending on heating method. Typical reflow peak temperatures range from 215 to 250 C. The top-surface temperature of the packages should preferable be kept below 230 C. Wave soldering Conventional single wave soldering is not recommended for surface mount devices (SMDs) or printed-circuit boards with a high component density, as solder bridging and non-wetting can present major problems. To overcome these problems the double-wave soldering method was specifically developed. If wave soldering is used the following conditions must be observed for optimal results:
TEA5757; TEA5759
* Use a double-wave soldering method comprising a turbulent wave with high upward pressure followed by a smooth laminar wave. * For packages with leads on two sides and a pitch (e): - larger than or equal to 1.27 mm, the footprint longitudinal axis is preferred to be parallel to the transport direction of the printed-circuit board; - smaller than 1.27 mm, the footprint longitudinal axis must be parallel to the transport direction of the printed-circuit board. The footprint must incorporate solder thieves at the downstream end. * For packages with leads on four sides, the footprint must be placed at a 45 angle to the transport direction of the printed-circuit board. The footprint must incorporate solder thieves downstream and at the side corners. During placement and before soldering, the package must be fixed with a droplet of adhesive. The adhesive can be applied by screen printing, pin transfer or syringe dispensing. The package can be soldered after the adhesive is cured. Typical dwell time is 4 seconds at 250 C. A mildly-activated flux will eliminate the need for removal of corrosive residues in most applications. Manual soldering Fix the component by first soldering two diagonally-opposite end leads. Use a low voltage (24 V or less) soldering iron applied to the flat part of the lead. Contact time must be limited to 10 seconds at up to 300 C. When using a dedicated tool, all other leads can be soldered in one operation within 2 to 5 seconds between 270 and 320 C.
1999 Aug 26
30
Philips Semiconductors
Product specification
Self Tuned Radio (STR)
TEA5757; TEA5759
Suitability of surface mount IC packages for wave and reflow soldering methods SOLDERING METHOD PACKAGE WAVE BGA, SQFP PLCC(3), SO, SOJ LQFP, QFP, TQFP SSOP, TSSOP, VSO Notes 1. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum temperature (with respect to time) and body size of the package, there is a risk that internal or external package cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the Drypack information in the "Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods". 2. These packages are not suitable for wave soldering as a solder joint between the printed-circuit board and heatsink (at bottom version) can not be achieved, and as solder may stick to the heatsink (on top version). 3. If wave soldering is considered, then the package must be placed at a 45 angle to the solder wave direction. The package footprint must incorporate solder thieves downstream and at the side corners. 4. Wave soldering is only suitable for LQFP, TQFP and QFP packages with a pitch (e) equal to or larger than 0.8 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm. 5. Wave soldering is only suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than 0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm. DEFINITIONS Data sheet status Objective specification Preliminary specification Product specification Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. not suitable suitable(2) recommended(3)(4) recommended(5) suitable not not suitable suitable suitable suitable suitable HLQFP, HSQFP, HSOP, HTSSOP, SMS not REFLOW(1)
1999 Aug 26
31
Philips Semiconductors - a worldwide company
Argentina: see South America Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140, Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor, 51 James Bourchier Blvd., 1407 SOFIA, Tel. +359 2 68 9211, Fax. +359 2 68 9102 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. +1 800 234 7381, Fax. +1 800 943 0087 China/Hong Kong: 501 Hong Kong Industrial Technology Centre, 72 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +852 2319 7888, Fax. +852 2319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V, Tel. +45 33 29 3333, Fax. +45 33 29 3905 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. +358 9 615 800, Fax. +358 9 6158 0920 France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex, Tel. +33 1 4099 6161, Fax. +33 1 4099 6427 Germany: Hammerbrookstrae 69, D-20097 HAMBURG, Tel. +49 40 2353 60, Fax. +49 40 2353 6300 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, 2nd floor, 254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025, Tel. +91 22 493 8541, Fax. +91 22 493 0966 Indonesia: PT Philips Development Corporation, Semiconductors Division, Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510, Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080 Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. +353 1 7640 000, Fax. +353 1 7640 200 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053, TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007 Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI), Tel. +39 039 203 6838, Fax +39 039 203 6800 Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057 Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +82 2 709 1412, Fax. +82 2 709 1415 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. +60 3 750 5214, Fax. +60 3 757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905, Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087 Middle East: see Italy Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. +47 22 74 8000, Fax. +47 22 74 8341 Pakistan: see Singapore Philippines: Philips Semiconductors Philippines Inc., 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474 Poland: Ul. Lukiska 10, PL 04-123 WARSZAWA, Tel. +48 22 612 2831, Fax. +48 22 612 2327 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW, Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762, Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 58088 Newville 2114, Tel. +27 11 471 5401, Fax. +27 11 471 5398 South America: Al. Vicente Pinzon, 173, 6th floor, 04547-130 SAO PAULO, SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 821 2382 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 93 301 6312, Fax. +34 93 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 Switzerland: Allmendstrasse 140, CH-8027 ZURICH, Tel. +41 1 488 2741 Fax. +41 1 488 3263 Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1, TAIPEI, Taiwan Tel. +886 2 2134 2886, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260, Tel. +66 2 745 4090, Fax. +66 2 398 0793 Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye, ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. +1 800 234 7381, Fax. +1 800 943 0087 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD, Tel. +381 11 62 5344, Fax.+381 11 63 5777
For all other countries apply to: Philips Semiconductors, International Marketing & Sales Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 (c) Philips Electronics N.V. 1999
Internet: http://www.semiconductors.philips.com
SCA 67
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
545002/03/pp32
Date of release: 1999
Aug 26
Document order number:
9397 750 06058

▲Up To Search▲

Price & Availability of TEA5757

	To Download TEA5757 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .